How to check outbound traffic high in ASA?

1- Capture the dropped packets on the ASA side using the following commands:


cap capdrop type asp-drop all // after issuing this command, wait for some time after that issue the following command

show cap capdrop // please collect the output of this command and send it to me


2- Please do a spanning for the port connecting the ASA on the switch to another port and connect a PC and collect wireshark captures, if you have Cisco switch, you can use the following commands to span the port:


(config)#monitor session 1 source interface both

(config)#monitor session 1 dest interface


Please perform step one when you plug in all the cable. For step 2, you may skip if you are not able to capture with Wireshark.